|
|
DESCRIPTION
Fuller Epolite FH-5313 is a 100% solid, room temperature curing, electrical grade, epoxy adhesive that has proven to be an excellent bonding agent for ferrite pot cures. This system is designed for continuous operation at temperatures up to 200°F and is available in premeasured kits.
USES
• Ideal for bonding a variety of substrates such as metal, glass and plastic.
• Potting and encapsulation
• Excellent chemical resistance, mechanical strengths and electrical properties.
• Meets General Electric (GE) Specification number M-2820-CR
|
|
|
|
 |
|
|
FH-5313 Epoxy Kit includes 16 oz. resin, 2 oz. hardener, and six droppers
|
|
|
|
|
|
|
|
New Pre-Measured Packaging
|
|
 |
|
|
FH-5313A-A-PAK Epoxy Kit includes 2-part pre-measured package for easy mixing and dispensing
|
|
|
|
| |
Part Numbers and Pricing (click for price and availability)
|
|
|
|
|
|
|
|
A-PAK 6g kit
|
5.2 oz. resin, .8 oz. hardener |
FH-5313A-A-PAK |
|
|
|
|
| |
Technical Data |
|
|
|
|
|
|
|
GENERAL PROPERTIES |
VALUE |
TEST METHOD |
|
|
|
|
|
|
|
Specific Gravity |
1.17 |
ASTM-D-792-00 |
|
|
Hardness, Shore D |
81 |
ASTM-D-2240-04e1 |
|
|
Tensile Strength, psi |
7,940 psi |
ASTM-D-683-03 |
|
|
Shear Strength, psi |
782 psi |
ASTM-D-1002-01 |
|
|
Compressive strength, psi |
15,440 psi |
ASTM-D-695-02a |
|
|
Flexural strength, psi |
13,860 psi |
ASTM-D-790-03 |
|
|
Coefficient of Linear Thermal
Expansion, in./in./C |
93.5 ppm/°C |
ASTM-E-831-03 |
|
|
Mixed viscosity |
1,970 cP |
MIL-STD-883E |
|
|
Pot life, minutes at 77°F |
30 |
ERF 13-70 |
|
|
Cure schedule, hours at 77°F |
12 |
|
|
|
Cure schedule, hours at 150°F |
1 |
|
|
|
Mix ratio by weight (A:B) |
100:15 |
|
|
|
|
|
|
|
|
ELECTRICAL PROPERTIES |
|
|
|
|
|
|
|
|
|
Dielectric Strength |
2,128 volts/mil |
ASTM-D-149-97a |
|
|
Dielectric Constant, 100 Hz |
4.06 |
ASTM-D-150-98 |
|
|
Dissipation Factor, 100 Hz |
.001 |
ASTM-D-150-98 |
|
|
Volume Resistivity, ohm/cm |
8.4 x 10E+14 |
ASTM-D-257-99 |
|
|
|
|
|
|
|
CHEMICAL RESISTANCE |
|
|
|
|
Isopropyl alcohol |
|
|
|
|
Weight change |
0.15% |
ASTM-D-543-95 |
|
|
Thickness change |
0.902% |
ASTM-D-543-95 |
|
|
Jet A |
|
|
|
|
Weight change |
0.055% |
ASTM-D-543-95 |
|
|
Thickness change |
0.519% |
ASTM-D-543-95 |
|
|
|
|
|
|
|
OUTGASSING PROPERTIES |
|
|
|
|
Total Mass Loss |
0.56% |
ASTM-E-595-03e2 |
|
|
CVCM |
<0.01% |
ASTM-E-595-03e2 |
|
|
Water vapor regain |
0.29% |
ASTM-E-595-03e2 |
|
|
|
|
|
|
|
|
|
|
|
|
Footnote:
This epoxy was originally manufactured by Applied Plastics Co. (APCO), in El Segundo, CA, and marketed under the part number R-313. It was subsequently designated as 5313. The company was later acquired by Hexcel Corporation, and the epoxy was renamed Epolite 5313. The product line was later acquired by HB Fuller Co., and the epoxy was renamed once again: Epolite FH-5313. It remains widely used, due to its unique and desireable properties.
Please note: The original hardener supplied by Applied Plastics was diethylenetriamine (UN 2079) which is subject to HazMat shipping regulations. We now use Dow Plastics D.E.H. 29 hardener, which is not regulated for transport. If your application relies upon some characteristic of the original hardener, we can still supply that. Please contact our technical sales department for more information.
|
|
|
|
|
|
|
|
|
